GE ZV925SLSS - Manual (Page 20)

20
STEP 5 INSTALL LOWER STRUCTURE
TO UPPER STRUCTURE
• Slide lower frame into
the upper frame. Match
the marked alignment
holes.
• Secure the upper and
lower frame with 16
screws, 4 on each side
of the frame.
Installation Instructions
,167$//$7,21³5(&,5&8/$7,1*
STEP 6 INSTALL BLOWER/MOTOR
• Raise the blower/
motor piece toward the
assembled frame.
• Carefully raise the motor
to the marked reference
point while making sure
the duct piece slips over
the blower outlet flange.
• Secure the blower/motor
to the frame using 16
screws, 4 on each side.
• Use tape to seal the duct
connection.