Ag Leader InSight Cotton Harvest Insert Ver.6.0 Users Manual - Manual (Page 27)

InSight™ Firmware Version 6.0
599
PN: 2002881 Rev.F
C
OTTON
C
ALIBRATION
C
ALIBRATION
T
AB
The Calibration Tab is where weight calibrations and Field Area calibrations are done. A weight
calibration must be completed after harvest has started. (For Header Sensor and Distance calibrations, see
“Picker Configuration” on page 584 ).
For a Cotton Configuration Menu that includes detailed information on the Calibration Tab, see “Cotton
Harvest Menu” on page 576.
Calibration Setup Tab
Settings Description
The Crop Type box lists the crop you are about to calibrate.
The Calibration drop-down menu lists all of the previous
calibrations that you have performed, and the date that these
calibrations were created.
The Field Area Calibration button will adjust the total area for
a field. For more information on the Field Area Calibration
button, see
“Field Area Calibration” on page 601 .
The Enter Weight button allows you to enter the measured
weight for a region. For more information, see
“Entering Actual
Load Weights” on page 603 .