Ag Leader InSight Cotton Harvest Insert Ver.6.0 Users Manual - Manual (Page 45)

InSight™ Firmware Version 6.0
617
PN: 2002881 Rev.F
R
EGION
S
ELECTION
(
CONTINUED
)
Automatic Region Changing
If you wish to enable the Automatic Region
Changing feature, select both the Automatic
Variety Tracking check box, and the Automatic
Region Changing check box, as shown at left.
Variety Tracking messages
Automatic Variety Tracking message
Automatic Region Changing message
If you have selected either the Automatic Variety
Tracking or Automatic Region Changing
features, you will see one of the messages at left
as you harvest your field.
• If you have selected Automatic Variety
Tracking, the message above left tells you that
the InSight monitor has detected a different
variety, and that you should manually change
the region.
• If you have selected Automatic Region
Changing, the message below left tells you that
the InSight monitor has detected a different
variety, and that the monitor is automatically
changing to a different region.