Ag Leader InSight Cotton Harvest Insert Ver.6.0 Users Manual - Manual (Page 5)

InSight™ Firmware Version 6.0
577
PN: 2002881 Rev.F
C
OTTON
S
ETUP
T
ABS
C
ONFIGURATION
The Cotton Harvest setup pages contain all the necessary settings to configure the system for logging,
mapping, and rate control for planting operations. The combination of Configuration, Combine, Header,
Crop and Calibration are referred to as a Configuration within the InSight system.
Cotton Harvest configurations
Cotton Harvest Setup
Tab
Description
Configuration
The Configuration Tab is where you can add and edit operating
configurations. For more information, see
“Configuration” on
page 577 .
Picker
The Picker Tab is where you can set up and configure additional
pickers. For more information, see
“Picker Tab Buttons” on
page 584.
Crop
The Crop Tab is where you can add and edit crops. For more
information, see
“Crop Tab Buttons” on page 593 .
Calibration
The Calibration Tab is where you can perform calibrations. For
more information, see
“Calibration Tab” on page 599 .