Ag Leader InSight Cotton Harvest Insert Ver.6.0 Users Manual - Manual (Page 7)

InSight™ Firmware Version 6.0
579
PN: 2002881 Rev.F
A
DDING
A N
EW
C
ONFIGURATION
To add a new configuration press the Add button. The Configuration Setup Wizard appears, as shown
below.
Step 1: Select picker from Configuration
Setup Wizard
Press New to add a new picker or select an existing one from
the list. For detailed information, see
“Adding A New Picker”
on page 586 .
Press Next to continue.
Step 2: Select picker from Vehicle Setup
Wizard
If you pressed New, the Vehicle Setup Wizard appears, as
shown at left. A list of all cotton pickers manufactured by
John Deere and Case IH which are supported by the InSight
monitor is provided in the Select Make and Select Model
drop-down menus. Select your make and model, then press
Next.
Step 3: Enter suggested picker name
Use the keyboard button to edit the name of the picker.
Press Finish to continue, and you will return to the next
window in the Configuration Setup Wizard.