Accessories, Remote engage switch (res), Technician – Ag Leader ParaDyme Operation Guide User Manual
Page 35: Software upgrade, Technician software upgrade

33
3. Press the check mark button to reset all the current
settings to the default factory settings.
Note:
If this option is selected, all settings will be reset and you will need to create, calibrate and
tune a new vehicle. You will also need to reconfigure any Base Stations or NTRIP profiles. database
backup is strongly suggested before resetting to defaults.
A
CCESSORIES
The Accessories menu is used to activate or deactivate optional sensors. Currently, only the remote
engaged switch is available. These options are always displayed when available. Once activated, the
system is aware that the sensor is installed and functional. When options are functional diagnostic
information is gathered and any malfunction of the sensor is reported through the diagnostic manager. If
the sensor is removed warnings and errors are reported until the sensor is deactivated in the system.
Note:
The Remote Engage Switch (RES) is optional equipment. If you plan to use the Remote
Engage Switch, go to the Accessories menu to activate the sensor.
Remote Engage Switch (RES)
To activate the Remote Engage Switch:
1. From the System menu, press the Accessories
button. The Accessories screen appears.
2. Press the Enable button to activate the Remote
Engage Switch. The Remote Engage Switch enabled
screen appears.
T
ECHNICIAN
The Technician screen is password protected for use by qualified service technicians only.
S
OFTWARE
U
PGRADE
The Software Upgrade screen enables you to upgrade your system with the latest application software:
• Upgrade Via Roof Module USB Upgrade Via the Display USB
• Upgrade Via WiFi Using a PC