Innovate Motorsports OT-2 - Manual (Page 11)

Channel Functions: The channels that are listed are the
channels that the ECU reports as available. You will notice
that you have the option of selecting whether you want the
channel to be Normal or Low priority. This feature will allow
you to scan non essential channels less often to gain greater
speed for more important channels. See chapter 6 on OBD-II
Channel speed for more information,
4. Press Done on the upper right hand corner when done configuring.
3.3.2 Selecting Channels to Display in the Gauge Display
1. Press the LogWorks tab.
2. On the upper left-hand corner you will see a icon, press it to enter the configuration
screen.
3. The configuration screen has three parameters to
configure:
Imperial Units: Allows you to select Imperial Units or
Metric
Lambda or AFR: If there is any Innovate Motorsports
A/F meter connected to the OT-2 you can chose to
display the channels as AFR or Lambda.
Gauges: Chose which channel to display on the
gauge. Note: Channels available for display must be
enabled from the OT-2 tab first.
4. Press Done on the upper right hand corner when done configuring.
3.3.3 Data Logging
To record a log press 'R' on the first page. The 'R' will blink while you are recording. Press ‘R’
again to stop.
To email a log swipe left until the Log List is in view. Select the log you wish to email.
The emailed file can be opened for viewing and analysis with the Windows PC version of
LogWorks. Free for download at www.tuneyourengine.com.