Innovate Motorsports OT-2 - Manual (Page 3)

1 OT-2
The OT-2 is an OBD-II USB/WiFi Interface for PCs & Smartphones. The unit is capable of
reading up to 16 channels of “OBD-II” (“On Board Diagnostic) information directly from your
vehicle’s ECU and integrate it into an Innovate MTS (“Modular Tuning System”) “Log Chain”. The
data from the OT-2 can be logged and analyzed on a personal computer using Innovate’s award
winning LogWorks software or on your iPhone or iPod touch with the LogWorks Mobile app
available in the Apple App store.
USB/Wifi: The light will
flash when a USB or Wifi
connection is established.
Vehicle: The light will flash
when the OT-2 has
established connection
with the ECU. The rate of
flash is directly correlated
to the speed at which the
ECU is delivering
information.
MTS: This light will flash at
a constant rate if there is
nothing connected to the
SERIAL IN port or if a
compatible MTS product is
correctly connected.
Power: This light will come
on and remain steady
whenever power is applied
to the unit.
SERIAL OUT: This connector is used to
connect the OT-2 to the computer with a serial
cable (purchased separately) or to output the
signal to a compatible MTS device, such as an
XD-16 gauge.
SERIAL IN: This connector is used to feed a
MTS compatible signal to the OT-2. One
example of this is to feed a signal from an LC-1
to be able to record A/F with the rest of your
OBD-II channels.