Sper Scientific 860031 pH - mV Bench-Top Meter - Manual (Page 17)

17
SETUP MODE
4. Press to enter step P2.1. The default “NO” icon
flashes on the middle display and P2.1 appears in the
lower display.
5. Press ▲ to change the status from “NO” on the display
to “YES” and then press again to confirm clear
memory. The LCD will return to P2.0 when all mem-
ories are deleted.
CAUTION:
THE MEMORY CLEAR PROGRAM IS DESIGNED TO
CLEAR 99 MEMORIES AT ONE TIME. PLEASE
CAREFULLY CONSIDER IF YOU WANT TO CLEAR THE
MEMORY AS THIS OPERATION CANNOT BE
REVERSED.