Sper Scientific 860031 pH - mV Bench-Top Meter - Manual (Page 49)

49
MEASUREMENT PROCEDURES
Recall Maximum & Minimum
This function reviews a maximum and minimum value
for all the data points stored in the memory.
1. Press REC for 2 seconds to enter Recall Mode. “REC”
will flash on the LCD.
2. Press MN/MX to view the minimum value of the
memory. Press MN/MX again to view the maximum val-
ue.
3. To exit memory recall, press REC for more than 2 se-
conds and return to Normal Mode.
Note…
All records are retained even when the meter is off. To
clear records, see page 16.