Sper Scientific 860031 pH - mV Bench-Top Meter - Manual (Page 28)

28
SETUP MODE
mode as COND/TDS/SALT. Refer to pages 70-71 for
default values of each parameter.
1. Press SET for 2 seconds to enter setup.
2. Press ▲ to select the reset section of the meter.
3. “rSt” will appear on the LCD and P9.0 will appear
directly below.
4. Press to enter P9.1.
5. Press ▲ to switch between “YES” or “NO.”
6. Press to confirm and return to P9.0.
7. Press ESC to return to Normal Mode.