Sper Scientific 860031 pH - mV Bench-Top Meter - Manual (Page 22)

22
SETUP MODE
6. Press ESC to return to Normal Mode.
Cell Constant (Conductivity Probe)
To view the probe data (cell constant) of each range:
Note…
If the range is not yet calibrated, the LCD will display the
default value (1.000).
1. Press MODE to select the probe program.
2. Press SET for 2 seconds to enter setup.
3. Press ▲ to select CELL. “CELL” will appear on the
middle of the LCD and P4.0 will appear on the lower
portion.
4. Press to enter P4.1. Press to enter P4.2,
P4.3, P4.4, P4.5.
Note…
Cell constant may degrade with time and usage.