Asante Technologies 5324 - Manual (Page 36)

Installation
Page 2-12
Figure 2-6 IntraSwitch Local Management Interface Main Menu
4 Type c to open the Configuration Menu.
The “Enter Password” prompt appears.
5 Type your password at the prompt.
▲
Important: The default password is
Asante. The password is case sensitive.
For information on changing the password,
see “Set Console Password” on page 5-33.
6 Type i to open the TCP/IP Parameter Menu.
7 Type i to select the option “Set IP Address.”
8 Type the IP address to be assigned to the switch
at the prompt.
This address becomes the new factory default
setting.
▲
Important: Depending on your network
configuration,
you may also need to set sub-
net mask and default router (gateway) infor-
mation for the IntraSwitch. See “Configure
TCP/IP Parameters” on page 5-11 for details.
9 Press r etur n .
10 Type q to return to the Configuration Menu.
The IntraSwitch is configured with an IP address
and can now be managed. See Chapter 4 for
information on management options.