Asante Technologies 5324 - Manual (Page 68)

Console Management
Page 5-20
Configure Port Parameters
This menu allows you to manually configure each of the
switch’s ports for speed, connection, link mode, and auto-
negotiation.
The default parameters for each 10Base-T port are:
❏ auto-negotiation — disabled
❏ port speed — 10Mbps
❏ link mode — half duplex
The default parameter for the 10/100TX port and the 10/100
MII expansion ports is:
❏ auto-negotiation — enabled
To access the Port Parameter Menu, type p from the
Configuration Menu. The following menu appears:
Figure 5-7 Port Parameter Menu
The Port Management menu displays statistics for one port at a
time. The current port for which statistics are displayed is
shown at the top of the screen (next to “
Port Number:”).
❏ Ports 1 – 24 — displays information for each
10Base-T port.
❏ Port 25 — displays information for the 10/100TX
port.
❏ Ports 26 and 27 — displays information for the
MII expansion ports (MII 1 and MII 2, respectively).
Current Settings