Asante Technologies 5324 - Manual (Page 61)

Configure Bootstrap Parameters
Page 5-13
Configure Bootstrap Parameters
This menu displays and allows you to change the bootstrap
parameters used for downloading a new version of software
when one is issued.
To access the Bootstrap Parameters Menu, type b from the
Configuration Menu. The following menu appears:
Figure 5-5 BootStrap Parameter Menu
▲
Important: The IntraSwitch’s Load Mode
default setting is
Local.
Normally, these settings never need to be
changed except when downloading a new ver-
sion of the switch’s software.
Current Settings
Table 5-5 explains each setting on the Bootstrap Parameter
Menu.
For information on using the menu, see the following:
❏ “Performing a Software Upgrade” on page 5-
15.
current settings