Vaisala viewLinc-4.1-M211518 - Manual (Page 106)

Chapter 5: Alarms
96 © 2012 Vaisala Canada Inc
5
To set a communication alarm using an existing alarm
template, select
Use Alarm Template
, then select the
template from the drop-down list.
6
To set custom alarm settings, select
Use Custom Alarm
Settings
.
7
Set your alarm settings on the General Parameters,
Notifications, and Comments tabs following steps 3 to 8
in “Creating Alarm Templates” on page 84.
Editing Communication Alarms
By default, there is one communication alarm preconfigured
for each host and device. These alarms cannot be deleted;
however, they can be edited.
To edit communication alarms:
1
From
Options | System Configuration | Device Manager
,
navigate the Device Browser tree and highlight the name
of the host or device whose communication alarm you
want to edit.
2
To edit a Host Communication alarm, click
Options | Host
from the device browser panel and select
Host
Communication Alarm Settings
.
3
To edit a device communication alarm, click
Options |
Device | Device Alarm Settings
and select
Device
Communication Alarm Settings
. The Communication
Alarm Settings screen appears.
4
Edit alarm settings as desired.
5
Click
Save
.
Disabling Communication Alarms
You can temporarily disable communication alarms without
deleting all the setting information.
To temporarily disable alarms:
1
From the Locations tree in Locations Manager, highlight
the name of the host or device whose communication
alarm you want to disable.