Vaisala viewLinc-4.1-M211518 - Manual (Page 81)

Chapter 4: Locations
70 © 2012 Vaisala Canada Inc
these commands will be available or greyed out depending
on the location/zone you have selected, if any. The following
options are available:
•
Refresh
: Reloads the selected tree.
•
Expand/Collapse All Zones
: Expands/collapses all zones
and sub-zones of the tree in the left locations panel.
•
Pause Threshold Alarming
: Pauses the threshold alarms
for the zone or location selected in the tree. If a zone is
selected and there are child locations, this command will
pause alarming on all child locations within the selected
zone.
•
Resume Threshold Alarming
: Resumes threshold alarms in
all data locations selected in the right panel. If a zone is
selected and there are child locations, this command will
resume alarming on all child locations within the selected
zone.
Understanding The Tabs in Locations
The right panel in locations is a tabbed panel consisting of
four tabs that are updated as the Locations tree is navigated.
The four tabs are as follows:
•
Table View Tab
: Displays the location, device, threshold
and status information for the currently selected location.
Only locations that have channels assigned to them will be
displayed.
•
Dashboard Tab
: Displays the dashboard for the current
selected location or zone and sub-zones. These
dashboards are managed in
Options | System
Configuration | Dashboard Manager
. Locations are
displayed on the dashboard with their current reading.
Zones are displayed as a folder icon and can be opened
by double clicking this icon. Hovering over a zone or
location will cause the mouse pointer to change and will
display a tooltip with extra information.
•
Location Alarms Tab
: All active alarms for the current
location or zone and sub-zones are shown under this tab.
If acknowledgement is required on an Alarm, the alarm will
be present in this window whether it is on or off. If
acknowledgement is not required on an alarm, the alarm