Vaisala viewLinc-4.1-M211518 - Manual (Page 17)

System Requirements
viewLinc 4.1 Administrator Guide 5
7
Edit Alarm email templates (see “Editing Alarm Email
Templates” on page 55)
8
Create Alarm and Threshold Templates (see “Creating
Alarm Templates” on page 84)
9
Add Devices (see “Adding Devices” on page 40)
10
Set and configure Alarm Thresholds (see “Setting
Threshold Alarms” on page 90)
11
Configure Alarms (see the sections on setting threshold,
communication and device alarms in Chapter 5: Alarms)
Once these set up activities are complete, you are ready to
start monitoring device readings, viewing events and printing
reports. You can also set up transfer schedules to view and
analyze Vaisala Veriteq device data in the vLog software (see
“About Transfers and Transfer Schedules” on page 130)
System Requirements
To install viewLinc, you need:
• Vaisala Veriteq loggers or Vaisala 300 Series Transmitters
(both are referred to as ‘devices’ in this guide and in
viewLinc)
• PC (will be referred to in the rest of this document as the
viewLinc Server)
• Vaisala Veriteq cables (there are specific cables for
attaching devices to Digi devices and attaching devices to
USB or Serial ports on a viewLinc Server)
• (optional) vNet devices, for connecting devices to a
viewLinc Server using an Ethernet connection
• (optional) Digi devices, for connecting devices to viewLinc
Server using an Ethernet connection