Vaisala viewLinc-4.1-M211518 - Manual (Page 51)

Chapter 3: System Settings
40 © 2012 Vaisala Canada Inc
Discovering Devices
To discover recently attached Vaisala Veriteq devices which
may not show up in the Device Browser automatically:

Select
Options | System Configuration | Device Manager .
Select the host machine you wish to scan, then right click
and select
Discover Devices
, or select
Options | Host |
Discover Devices
from the device browser in the left
hand panel:
Note:
This process may take several minutes, depend-
ing on the number of Vaisala Veriteq devices
and/or components in your network.
Note:
300 Series Transmitters are not recognized by
viewLinc using the Discover devices procedure;
use your Digi Discovery software if required.
Adding Devices
You may want to add a device to your system if:
• discovering devices is taking too long
• you are adding a 300 Series Transmitter device
• you want to add a variety of device types at one time
Note:
To add multiple Vaisala Veriteq devices at one
time, see “Discovering Devices” on page 40.