Red Lion LEGEND - Manual (Page 17)

PROGRAMMING MENUS
The programming menus are accessed when “Program Mode” is displayed
in the main display loop. All parameter values can be accessed from the Main
Programming Menus. Accessibility to the programming menus depends on
the Program Disable Function setting (See Front Panel Accessible Functions
with Program Disable) and could require a Program Code number to enter the
programming menus.
In the programming menus, pressing the up or down arrow key scrolls through
the main menus. From the Main Menu, a sub-menu is accessed by pressing the
SEL> key. In a sub-menu, the operator can view the parameter values that are
currently selected. To change a parameter value, the edit menu is accessed by
pressing the SEL> key (See Programming General Description section).
The Preset and Counter Load module can be accessed from any Main
Programming Menu by pressing the PRS key. When exiting the preset and
counter load module, the unit returns to the last main menu that was viewed.
When all parameter changes have been made, the operator can exit the
programming loop, from any main menu, by pressing the <ESC key. Exiting
saves all parameter values and returns the unit to the last indication display
that was viewed. Shown are all of the main programming menus:
-15-