Red Lion LEGEND - Manual (Page 71)

-69-
APPENDIX “C” - APPLICATION
The cloth moves over a
roller with a circumference
of 13.20 inches. A 72 tooth
g e a r i s mo u n t e d o n t h e
roller. Due to the size of the
gear, the best sensor would
be the model HESS. The
d e s i r e d d i s p l a y o n t h e
LGPM is tenths of inches. It
is also desired to display a
rate of tenths of inches per
minute. With the Legend
Plus, the scaling for the rate
i s t h e s a me a s f o r t h e
counter.
Outputs One through Three are programmed to the count
display and will fire the ink jets at the appropriate intervals.
The outputs are programmed for a Timed output. Outputs
Four through Six are assigned to the rate display and will be
programmed to request messages to appear on the display
when the listed event occurs:
Output 4 - Speed up Line #4
Output 5 - Slow down Line #4
Output 6 - Overspd STOP! (Top Priority)
The following is a chart of the necessary programming
as entered into the Legend Plus unit.
A textile manufacturing company uses three
ink jets to mark cloth at various locations. They
need a counter to track the cloth measurement
a n d p r o v i d e o u t p u t s t o t h e i n k j e t s a t
p r e d e t e r mi n e d p o i n t s . T h e y a l s o r e q u i r e
displayed messages to inform their operators of
changing line speed conditions and corrective
actions that need to be taken. With its ability to
mo n i t o r r a t e , c o u n t , p r o v i d e mu l t i - p r e s e t
outputs and display user programmed messages,
the Legend Plus Multi-preset counter is the best
unit for the job.