Electrical specification overview – High Country Tek PLD, Powerline / universal single / dual coil PWM Valve Driver User Manual

Page 14

Advertising
background image

Part No:-

021-00155 RevD7

PowerLine System Controller User Guide

Page | 14

PowerLine User Guide






Electrical Specification Overview:

1

- Board Style:

High Country Tek unique size and mounting.

2

- Connector Type:

12 way heavy duty screw terminal.

3

- Input Supply Voltage:

9 – 30VDC ( absolute maximums )

4

- Input supply current:

~400mA quiescent + valve currents

5

- Input supply protection:

User supplied in-line fuse ( AGC5 )

6

- User Reference Voltage:

+5VDC ( +/- 10% ) – short circuit protected.

7

- User Reference Voltage current:

~5mA ( Absolute maximum ) current limited.

8

- Command Input types:

DC Voltage and pulse

9

- DCV Command input value range:

0 – 5VDC or 0 – 10VDC

10 - DC Current Command Input Range

4 – 20mA ( 100 Ohm resistor load )

11 - Pulse Command input value range:

0 – 30 KHz

12 - Pulse command voltage range:

±0 – ±30V absolute max.

13 - Enable input value range:

0 – 5V or +module supply

14 - Enable input impedance:

10 KOhm

15 - Parameter Adjustments:

All through graphical user interface software.

16 - Coil ‘A’ current setting range:

~0 – 3000mA ( with current feedback circuit )

17 - Coil ‘B’ current setting range:

~0 – 3000mA ( with current feedback circuit )

18 - Coil ‘A’ & ‘B’ Protection:

Open and short circuit detect circuit.

19 - Ramp ‘A’ max setting range:

~0 – 10 seconds up and down

20 - Ramp ‘B’ max setting range:

~0 – 10 seconds up and down

21 - Dither frequency (Hz ) range:

~0 – 250Hz

22 - Dither amplitude max:

~0 – 5V Pk-Pk

23 - Process ‘P’ term scale factor range:

0 - 7

24 - Process ‘I’ term scale factor range:

0 - 7

25 - Industry Compliance:

Designed to meet latest CE certification standards

26 - Environmental:

Totally encapsulated unit for mechanical protection.

27 - IP rating:

IP68 ( Module only - derate for connectors as required )

28 - NEMA rating:

6P ( Module only - derate for connectors as required )

29 - Humidity:

95 – 100% Non condensing

30 - Storage Temp range:

-60 to +90 Deg C ( Max )

31 - Operating temp range:

-40 to + 85 Deg C ( max )

Advertising