Introduction, Cautions, Warranty information – High Country Tek PLD, Powerline / universal single / dual coil PWM Valve Driver User Manual
Page 2
Part No:-
021-00155 RevD7
PowerLine System Controller User Guide
Page | 2
PowerLine User Guide
Welcome
to the High Country Tek Inc. ( HCT ) PowerLine system controller user guide, and thank you for
selecting this HCT controller to use in your application
The following information is designed to allow you to connect, set-up and optimize the PowerLine module.
If you have used HCT products before, you will recognize some of the instructions and settings. For those of you
that are new to HCT, please read the directions with care and be sure that if you have any questions regarding
this industry unique controller, then please contact us using one of the numbers given on the back page of this
manual.
We value our customers, their experience and abilities and ask that if you would like to see any additions,
subtractions or find any errors in this publication, that you contact HCT’s customer service so that we can
correct the information and make sure that our programming community is using the latest information.
If you require urgent support, more information or would like specific programming areas clarified, you can
contact us on the customer support number at 1 530 265 3236 or E-mail us through our website at
giving details of your issue and how we can contact you.
Introduction:
This manual is designed to provide information needed for the installation and use of the Power Line Valve
Controller. Its intended user is qualified trained service personnel that understand the hazards involved in an
electromechanical environment. It is recommended that this manual be read in its entirety before installation is
begun with particular attention paid to caution and safety information.
Cautions:
Changing setup values and limits under computer control while the machine is operating may cause sudden
machine movement, which may lead to possible injury or death. It is strongly recommended that any moving
parts are disabled prior to any alignment procedure whenever possible. In any case, caution should be
exercised during any procedure and work should be completed only by qualified trained personnel.
Warranty Information:
High Country Tek Inc. Guarantees this product to be free of defects in materials and workmanship for a period
of one year extending from the date the unit was shipped from the factory. Within this time frame, High Country
Tek will provide evaluation of warranted items free of charge. Warranty repair or replacement will be at the
factory’s discretion. If necessary, contact the factory for return authorization by phone (530) 265-3236, Fax
(530) 265-3275, E-Mail
or by writing our service department at, High Country Tek,
Service Dept., 208 Gold Flat Court, Nevada City, CA 95959. To help us serve you better, please have the units
full Model / Part Number and Serial Number available when contacting the factory for any reason. Do not return
products to the factory without prior authorization and a RMA number attached.