Xu – ppp dial up (modem only) command, Xd – modem disconnect (modem only) command, Dhcp server configuration – MagTek MICRImage User Manual
Page 47
Section 5. Network Interface
39
XU – PPP Dial Up (Modem Only) Command
Connects to network. Stays connected after file transfer. Modem will timeout-disconnect if no activity
detected in 2 minutes.
XD – Modem Disconnect (Modem Only) Command
Hangs up phone connection.
DHCP SERVER CONFIGURATION
To utilize the DHCP configuration for MICRImage with Ethernet, the server must be set up appropriately.
Please refer to the documentation for your particular DHCP device for more details. The server should
already be configured to handle the individual IP address and subnet mask. Check to make sure the
Router/Gateway option #3 is also activated if required.
To dynamically configure the FTP parameters, three user-defined options must also be set up. These are:
179 FTP Username
type String, Max Length=16
180 FTP Password
type String, Max Length=16
181 FTP SERVER ADDRESS
type String, Max Length=100