MagTek MICRImage - Manual (Page 68)

MICRImage Check Reader
60
Fmt 60xx:
[transit] '/' [acct #] '/' [check #] '/' [check type]
• [transit]:
- all characters in the field
- remove dashes
• [acct #]:
- maximum of xx characters; when xx=00 all characters are sent
- remove spaces and dashes
• [check #]:
- maximum of 10 characters
- remove spaces and dashes
- if no check #, remove preceding slash ('/')
• [check type]:- personal checks ('1'); commercial checks ('2')
Fmt 61xx:
[transit] <TAB> [acct #] <TAB> [check #] <TAB>
• [transit]:
- all characters in the field
- remove dashes
• [acct #]:
- maximum of xx characters; when xx=00 all characters are sent
- remove spaces, dashes and leading zeros
• [check #]:
- all characters in the field
Fmt 62xx:
'T' [transit] 'T' [acct #] 'A' [check #] 'S' [status]
• [transit]:
- all characters in the field
- remove dashes
• [acct #]:
- maximum of xx characters; when xx=00 all characters are sent
- remove spaces and dashes
• [check #]:
- all characters in the field
- remove dashes and spaces
• [status]:
- this is a programmable option that must be enabled (See Table 2-4).
Fmt 63xx:
[transit] [acct #] [check #]
• [transit]: - all characters in the field
- remove dashes
• [acct #]:
- maximum of xx characters; when xx=00 all characters are sent
- remove spaces and dashes
• [check #]:
- always 4 characters, zero filled
- remove spaces and dashes