Pr16 – phone (modem ppp only), Pr17 – user id (modem ppp only), Pr18 – user password (modem ppp only) – MagTek MICRImage User Manual
Page 52: Pr19 – ftp file directory, Pr20 through pr29 – predefined snippets, Abc,size,fn<cr> where
MICRImage Check Reader
44
PR16 – Phone (Modem PPP Only)
This sets the user phone number to be dialed by the modem (maximum of 30 characters):
PR16= 714-853-1212<CR>
PR17 – User ID (Modem PPP Only)
This sets the user ID (maximum or 40 characters):
PR17= GOBLIN<CR>
PR18 – User Password (Modem PPP Only)
This sets the user password (maximum of 40 characters). The user password is a ‘hidden’ parameter so
only ‘*’ will be output for each character.
PR18=PAHSWURD<CR>
PR18<CR>
PR18=********<CR>
PR19 – FTP File Directory
This sets the FTP file directory(maximum or 32 characters):
PR19=/IMAGES(CR)
PR20 through PR29 – Predefined Snippets
These properties may contain one or two snippets as described in Section 4 under Snippets, as well as any
command parameters that are valid for the TI, SI, and BC commands. (See these commands for details.)
In effect, these properties may be viewed as extensions of those command lines. For example, given the
following preset properties:
PR20 = (T320 B300 L900 R50) (T415 B350 L900 R300)<CR>
PR28 = C1 NIMAGE.TIF] T333 = MY TAG]<CR>
The following commands could be used: