Campbell Scientific RTDAQ Software - Manual (Page 121)

Section 6. View Pro
New XY Plot. Brings up an XY Plot
window from which you can plot data
values on the y-axis against another
specified data value on the x-axis.
New Rainflow Histogram. Brings up a
Rainflow Histogram window from which
you can view Rainflow Histogram data
values.
New FFT. Brings up an FFT window from
which you can view FFT data values.
Keep Selected Graph On Top. When data
is being graphed and this option is selected,
the currently selected graph will always be
at the forefront of the View Pro program.
This is a toggle button. The button icon will
have a green check mark through it when the
option is currently selected.
Reset Grid for New Selections. If no
graphs are open, this button will clear all
selections in all open files. If one or more
graphs are open, this button will change the
selected graph to “None” and clear all
selections in all open files for the “None”
selection set.
Selected Graph. Indicates which graph is
currently selected. The drop-down list can be
used to switch the currently selected graph to
a different graph. Selected Graph can also be
set to None in anticipation of making
selections for a new graph.
This control is disabled if no graphs are
opened.
Bring Selected Graph to Front. Brings the
currently selected graph to the forefront of the
View Pro program.
This control is disabled if no graphs are
opened.
6-3