Campbell Scientific RTDAQ Software - Manual (Page 174)

Section 7. Monitoring Data in Real-time
You may choose the Print item to immediately send the current snapshot to the
currently selected printer without pre-viewing it. The Clear, Fill and Stop,
and Start/Stop items perform the same function as pressing the button (see
descriptions given above).
Select Save Configuration to save the current graph configuration (fie
options, etc.) to a file or Load Configuration to load a previously saved graph lds,
configuration.
lay. Hiding these
items allows more room for the graphical display for enhanced viewing after
ration.
7.4.9 Setting th
Set the options for the current Graph screen by pressing the Options button, or
Choose the Hide Controls/Show Controls to hide or show the items for
controlling the graph that are given to the left of the disp
all of the settings have been set to the desired configu
e Options for the Graph Screen
by selecting Options from a right-click menu. The Graphing Options screen
appears.
7.4.9.1 Scaling the Axes
When data is displayed in the Graph window, a scale is also displayed
showing various values for spatial levels on the screen. You can use a y-axis
scale either on the left side of the graph, on the right side, or both. See Select
Axis in Section 7.4.9.4.1 for details on how to do this. You can also show time
scales for the x-axis below the graph if desired.
parameters
y display
two y-axes, one on the left side and one on the right. Choose the Y Axis tab to
customize the axis on the left.
Chose the Scaling tab from the Graphing Options screen to set up
used to space data on the X and Y axes of the graph. The graph ma
7-22