Campbell Scientific RTDAQ Software - Manual (Page 342)

Section 10. Utilities
TABLE 10-4-1. Transaction Log Messages
Code Message Text Message Parameters Message Meaning User Response to
Message
48 Set variable
failed The datalogger failed
to acknowledge the
set variable message.
50 Program file
send start The server is sending
a program to the
datalogger. The
actual program
segments will appear
as BMP1 message
type 4.
51 Program file
send status The datalogger has
received the program
segment.
52 Program file
send complete The datalogger has
compiled the
program.
53 Program file
send failed The datalogger did
not acknowledge the
receipt of the
program, the program
did not compile, or
communications
failed with the
datalogger. If the program did not
compile check the error
messages. Otherwise,
check communications
with the datalogger by
trying to check the
clock. If that fails,
follow the steps for
message 14.
54 Program file
receive start The server is
requesting the
datalogger program.
The actual program
segments will
appears as BMP1
message type 5.
55 Program file
receive status A program segment
has been received.
56 Program file
receive
complete The datalogger
program has been
received from the
datalogger.
57 Program file
receive failed The datalogger failed
to send the program
or communications
with the datalogger
failed. Check communications
with the datalogger by
trying to check the
clock. If that fails,
follow the steps for
message 14.
64 Device restore
from file
succeeded On server startup a
device previously
entered in the
network map has
been restored.
10-72