Campbell Scientific RTDAQ Software - Manual (Page 169)

Section 7. Monitoring Data in Real-time
displays the Stop button in the same location wh
running. en the Graph window is
You can create a vertical line cursor on a stopped (i.e., paused) screen by
double-clicking on the screen. If the Graph is running when you double-click,
it will be stopped automatically. When the vertical cursor is moved around the
screen, you can see the value for the current point in the Selected Fields data
display area.
Press the Clear button to clear all traces on the Graph window and begin
graphing again. The display will not stop if it is in the “started” state, but just
clear the screen and continue forward.
tton if you would like the
user.
Press the Fill and Stop button instead of the Start bu
Graph window to show values only for the current Graph Width setting and
then stop. The data remains on the display for further investigation by the
To remove an item from the graph, highlight that item in the Selected Fields
area and press the Delete button . You may also right-click on the item to
be deleted and select Delete from the menu. All items can be deleted by
pressing the Delete All button or selecting Delete All from the right-click
menu.
7-17