Campbell Scientific RTDAQ Software - Manual (Page 199)

Section 7. Monitoring Data in Real-time
The Draw Every setting indicates how many points will actually have a mark
as they appear on the screen. If the setting is set to 5, then only every fifth
point will have a mark as it appears on the XY Plot. The Color option controls
the background color of the box used to show the mark. This is only used
when the Transparent setting is not checked. The Style check box selects
what data will be displayed in the marking. The y-value, x-value or both can
be displayed.
7.6.6.5 Save Tab
Use the Save Tab to save the current set of configured options to a
configuration file, or to retrieve a previously saved set of configuration options.
The options that are set up in all other tabs can be saved or restored based on
your selection to save or load the configuration.
7-47