Campbell Scientific RTDAQ Software - Manual (Page 181)

Section 7. Monitoring Data in Real-time
7.4.10 Accepting or Abandoning Changes to the Graph Options
After setting the various options for the graph, press the Apply button to
immediately put those changes into effect. The Options screen will not be
closed, and the settings will be applied. Press the OK button if you would like
to apply the settings and also exit the Options screen. Press Cancel if you
would like to abandon any changes made to the settings since the screen was
opened. Online help topics can be accessed with the Help button.
7.5 Fast Graph
7.5.1 Using the
e Fast Graph window of RTDAQ, ensure that you are connected to a
The Fast Graph window displays time-series data items from a datalogger
graphically in real-time. The data value from the datalogger is used for the
y-axis value, and the timestamp of the data value is used for the x-axis value.
Fast Graph
To use th
datalogger, then select the Monitor Data tab. Click on the button labeled Fast
Graph.
7-29