Campbell Scientific RTDAQ Software - Manual (Page 164)

Section 7. Monitoring Data in Real-time
You can display the same table in more than one column of a
single Table Monitor screen, or you can display the same table
in multiple Table Monitor screens. In such cases, starting one
column that displays the table with the Start button will start all
of them. NOTE
7.3.2.2 Reset Table
You can reset the table being displayed by pressing the Reset Table button.
This clears all collected data out of the table in the datalogger and begins
storing data again starting with record zero.
Ensure you have collected all the data you need from a
table before you reset it, since after that the data
cannot be recovered. WARNING
7.3.2.3 Fields and Values
For each table, a grid with two columns is displayed: Fields and Values. Fields
lists the names of each column of the selected table. Values displays the last
retrieved value for that column. The displayed values are updated as quickly as
the window can obtain the data from the communications server.
Checking the Show Units check box will display the engineering units for each
measurement after its value, if those units were defined in the CRBasic
program currently running in the datalogger (i.e., using a Units declaration for
a declared variable).
7-12