Allied Telesis x600-48Ts/XP - Manual (Page 25)

x600 Series Layer 3 Gigabit Ethernet Switches Installation Guide
25
SFP Transceiver Slots
All of the x600 Series switches feature slots for four optional Gigabit
Ethernet SFP transceivers that interconnect network devices over large
distances using fiber optic cable. SFP transceivers are also available with
a copper cable interface allowing a host device designed primarily for
optical fiber communications to also communicate over unshielded twisted
pair networking cable. Figure 5 illustrates an SFP transceiver.
Figure 5. SFP Transceiver
Refer to “Installing an SFP Transceiver” on page 68 for the SFP
installation instructions.
Note
For a list of supported SFP transceivers, contact your Allied Telesis
sales representative.