Allied Telesis x600-48Ts/XP - Manual (Page 28)

Chapter 1: Overview
28
SD Card Slot
All of the x600 Series Switches have an SD card slot which is designed for
an SD card which stores configuration files and AlliedWare Plus
Operating
System Software image files. See Figure 7.
Figure 7. SD Card Slot
An SD card can make it easier for you to upgrade the files on a switch or
transfer files between x600 switches. See Figure 8.
Figure 8. SD Card
Note
An SD card is not required for normal operations of the switch.
The x600 switches support various SD cards that are available from many
vendors.
To insert an SD card, position it so that the manufacturer’s brand label is
facing up and press it into the slot until it is flush with the front of the
chassis. The SD card is self-ejecting. To remove the SD card, press the
card toward the x600 switch and the SD card pops out.
For information on how to transfer files to and from a SD card, refer to the
AlliedWare Plus
Operating System Software Reference Guide.
1318
x600-24Ts/X
L/A
D/C
D/C
L/A
R
1 3 5 7 9 11 13 15 17 19 21R 23R
2 4 6 8 10 12 14 16 18 20 22R 24R
BUSY
READY
FAULT
SD
1319
SD Memory Card
LOCK