Allied Telesis x600-48Ts/XP - Manual (Page 53)

53
Chapter 3
Installing the Hardware
This chapter provides procedures to install an x600 switch. The chapter
contains the following sections:
ˆ “Reviewing Safety Precautions” on page 54
ˆ “Unpacking a Switch” on page 56
ˆ “Installing the Power Cord Retaining Clip” on page 57
ˆ “Installing the Switches in an Equipment Rack” on page 58
ˆ “Resetting the Switch” on page 60
ˆ “AT-StackXG Module Installation” on page 61