Sfp leds, Xfp transceiver slot leds, Sfp leds xfp transceiver slot leds – Allied Telesis x600-48Ts/XP User Manual
Page 30: Table 4. sfp slot led table 5. xfp slot led
Chapter 1: Overview
30
SFP LEDs
Each SFP transceiver slot on the x600 switches has one LED, defined in
Table 3.
XFP Transceiver
Slot LEDs
Each 10 Gigabit Ethernet transceiver slot on the x600-24Ts/XP and x600-
48Ts/XP switches has one LED, defined in Table 4.
D/C
Duplex
Mode and
Collisions
Green
The port is operating in full-duplex
mode.
Amber
The port is operating in half-duplex
mode (only applies when operating at
10 or 100 Mbps).
Flashing
amber
Collisions are occurring on the port
(only applies when operating at 10 or
100 Mbps, half duplex mode).
Table 2. Twisted Pair Port LEDs (Continued)
LED
Function
State
Description
Table 3. SFP Slot LED
LED
Function
State
Description
L/A
Link Status
and Activity
Off
No link has been established between
the port and the end node.
Green
The port has established a link at 1
Gbps.
Flashing
green
Packets are being received or
transmitted at 1 Gbps.
Table 4. XFP Slot LED
LED
Function
State
Description
L/A
Link Status
and Activity
Off
No link has been established between
the port and the end node.
Green
The port has established a link at 10
Gbps.
Flashing
green
Packets are being received or
transmitted at 10 Gbps.