Stack leds, Figure 11. stack leds, Table 7. stack leds – Allied Telesis x600-48Ts/XP User Manual

Page 32

Advertising
background image

Chapter 1: Overview

32

Stack LEDs

The STACK LEDs reflect the status of the two Stack ports on the
AT-StackXG Stacking Module. To locate the Stack LEDs, see Figure 11.

Figure 11. Stack LEDs

These LEDs remain off if the module is not installed. See Table 6 for a
description of the STACK LEDs.

Table 6. STACK LEDs

LED

State

Description

MSTR

Off

The switch is not part of a stack or is a member
unit of the stack.

Green

The switch is the master unit of the stack.

1 L/A

Off

Stack Port 1 has not established a link to a
stacking port on another AT-StackXG Stacking
Module.

Green

Stack Port 1 has established a link to a
stacking port on another AT-StackXG Stacking
Module.

Flashing
Green

Stack Port 1 has established a link to a
stacking port on another AT-StackXG Stacking
Module and is sending or receiving packet
traffic.

1313

L/A

50

XFP

LINK / ACT

STATUS

FAULT

MASTER

RPS

PWR

PRES

MSTR

L/A

L/A

1

2

STACK

CONSOLE

x600-48Ts/XP

BUSY

READY

FAULT

SD

RESET

Layer 3 Gigabit Ethernet Switch

Advertising
This manual is related to the following products: