Allied Telesis AT-S80 - Manual (Page 184)

Chapter 16: Destination MAC Filter
184 Section I: Using the Menus Interface
4. Enter a MAC address in the following format:
xx:xx:xx:xx:xx:xx
The MAC address is displayed in the Destination MAC Filter menu.
5. Type Q to select Quit to previous menu and save your changes.
Removing
Destination MAC
Filtering
Addresses
To remove a destination MAC filtering address on the switch, perform the
following procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
The Basic Switch Configuration Menu is shown in Figure 4 on page 32.
2. From the Basic Switch Configuration menu, type F to select
Destination MAC Filter.
See the Destination MAC Filter Menu in Figure 44 on page 183.
3. Type R to select Remove MAC Address.
The following prompt is displayed:
Delete MAC address from filter >
4. Enter a MAC address in the following format:
xx:xx:xx:xx:xx:xx
The MAC address is removed from the Destination MAC Filter menu.
5. Type Q to select Quit to previous menu and save your changes.