Allied Telesis AT-S80 - Manual (Page 320)

Chapter 34: Dial-in User
320 Section II: Using the Web Browser Interface
Deleting a Dial-in User
This procedure explains how to delete an existing Dial-in User on the
switch.
To delete a Dial-in user, perform the following procedure:
1. From the bookmarks on the left side of the page, select Security.
The Security folder expands.
2. From the Security folder, select Dial-in User.
The Dial-in User Page is shown in Figure 91 on page 318.
3. To delete a user name and its associated password and VLAN
assignment, click delete next to the user that you want to remove.
4. Click Apply to save your changes on the switch.