Allied Telesis AT-S80 - Manual (Page 89)

AT-S80 Management Software User’s Guide
Section I: Using the Menus Interface 89
Enabling or Disabling Port Mirroring
To enable or disable port mirroring on the switch, perform the following
procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
The Advanced Switch Configuration Menu is shown in Figure 14 on
page 64.
2. From the Advanced Switch Configuration Menu, type M to select Port
Mirroring Configuration.
The Port Mirroring Menu is shown in Figure 19 on page 87.
3. Type E to select Set Mirroring Status.
The following prompt is displayed:
Enable or Disable mirroring (E/D)>
4. Type D to disable port mirroring.
The port that was functioning as the mirroring port can now be used as
a normal networking port.
5. Type Q to select Quit to previous menu and save your changes.