Allied Telesis AT-S80 - Manual (Page 325)

AT-S80 Management Software User’s Guide
Section II: Using the Web Browser Interface 325
The Firmware Upgrade via TFTP Page is shown in Figure 93.
Figure 93. Firmware Upgrade via TFTP Page
4. Change the following parameters as necessary:
Image/Version Date
Displays the current version and date of software installed on the
switch. This field cannot be changed.
Download Server IP
The IP address of the TFTP server from which you are downloading
the new software.
Download File Name
The name of the AT-S80 file you are downloading.
Retry Count:
The number of times the firmware upgrade is retried. The default
number of tries is 5. The range is 1 through 20.
5. Click Apply.
The software immediately begins to download onto the switch. This
process takes a few minutes. After the software download is complete,
the switch initializes the software and reboots. You will lose your web
browser connection to the switch during the reboot process.