Allied Telesis AT-S80 - Manual (Page 196)

Chapter 17: 802.1x Port-based Network Access Control
196 Section I: Using the Menus Interface
8. To select between port-base or MAC address based authentication,
type M to select Auth Mode.
The following prompt is displayed:
Select the Port based or MAC based auth mode (P/M) >
a. Select P and the menu is redrawn.
b. Select M and the MAC Based Access Control Configuration Menu
is displayed.
Authentication Method
Select an authentication method that is enabled on the switch either R
(RADIUS) or L (local).
9. If the port control setting is Auto and you want to return the EAPOL
machine state on the port to the initialized state, do the following:
a. Type I to select Initialize Port.
The following prompt is displayed:
Would you initialize authenticator? (Y/N)>
b. Typing Y returns the EAPOL machine state on the port to the
initialize state. Typing N cancels the step.
10. Type Q to select Quit to previous menu and save the settings.