Allied Telesis AT-S80 - Manual (Page 271)

AT-S80 Management Software User’s Guide
Section II: Using the Web Browser Interface 271
3. To change the status of the packet threshold for all the ports on the
switch, select the pull-down menu next to the Broad/Multicast Packet
Threshold field. Choose Low, Medium, and High from the pull-down
menu. Then press Apply.
By default, the packet threshold is set to Low.
4. To set the DLF Ingress Packet Status for all the ports on the switch,
select the pull-down menu next to the DLF Ingress Packet Status field.
Choose Enable or Disable. Then press Apply.
By default, the packet status is set to Disable.
5. To select the Ingress mode of a port, select the pull-down menu next to
the Ingress field. Choose Enable or Disable. Then press Apply.
By default, the Ingress field is set to Disable.
6. To select the mode of a port, select the select the pull-down menu next
to the Mode field. Choose Bcast for broadcast mode or Bcast/Mcast
for multicast mode. Then press Apply.
By default, the Mode field is set to Bcast/Mcast.