Allied Telesis AT-S80 - Manual (Page 280)

Chapter 29: Virtual LANs
280 Section II: Using the Web Browser Interface
Creating a Port-Based VLAN
To create a port-based VLAN, perform the following procedure:
1. From the bookmarks on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select VLAN.
The VLAN folder expands.
3. From the VLAN folder, select Port-Based VLAN.
The Port-Based VLAN Page is shown in Figure 79.
Figure 79. Port-Based VLAN Page
4. To assign a VLAN ID, type a VLAN ID in the VLAN ID field.
You can choose a value between 2 and 4,000.
5. To assign a name to a VLAN, type in a name in the VLAN Name field.
6. To assign ports to the VLAN, click on the port numbers labeled either
Static Tagged or Static Untagged. Then click Apply.