Allied Telesis AT-S25 - Manual (Page 221)

AT-S25 Management Software User’s Guide
221
The Port Trunking window in Figure 82 is displayed.
Figure 82 Port Trunking Window - Create
5. From the Trunk Number pull-down list, select the group of port trunk
you are creating.
6. In the Trunk Name text box, enter the name of the trunk you are
creating.
7. Select the ports in a graphical image of an AT-8316F or an AT-8324
Fast Ethernet Switch.
If the switch does not contain a port trunk, all ports in the switch
image are black. If there is a port trunk, the ports of the trunk are
white.
8. Click to select the ports that will make up the port trunk.
The selected ports turn white while the remainder of the ports
stay black.
9. Click Apply.
The new port trunk is immediately activated on the switch. You
could now connect the data cables to the ports of the trunk on the
switch.