Allied Telesis AT-S25 - Manual (Page 259)

AT-S25 Management Software User’s Guide
259
Adding Static and Multicast MAC Addresses
This section contains the procedure for assigning static address to the
ports on the switch. You could assign up to 255 static MAC addresses per
port.
To add a static address to the MAC Menu, perform the following
procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 2.
3. From the Layer 2 page, select the MAC Address tab.
The MAC Address window in Figure 104 on page 257 is displayed.
4. Click Add.
The Add Static MAC Address window in Figure 106 is displayed.
Figure 106 Add Static MAC Address window
5. In the MAC Address section of the window, enter the new static MAC
address.
6. Select a port and a VLAN ID.
7. Click Apply.
8. Repeat this procedure to add other static addresses to the switch.