Allied Telesis AT-S25 - Manual (Page 252)

Section III: Web Browser Management
252
Setting the Switch’s VLAN Mode
This section contains the procedure for setting a switch’s VLAN mode.
You could configure a switch to support port-based and tagged VLANs
or to operate in the Basic VLAN mode.
Note
Refer to Chapter 10, Virtual LANs, for descriptions of port-based
and tagged VLANs and the Basic VLAN mode.
To set the switch’s VLAN mode, perform the following procedure:
1. From the Home Page, select Configuration.
The Configuration window is displayed with the System menu
option selected by default.
2. If the System menu option is not selected, select it and then select the
General tab.
The General tab window in The General tab in Figure 102 is
displayed.
Figure 102 Configuration - General Window