Allied Telesis AT-S25 - Manual (Page 72)

Section II: Local and Telnet Mangement
72
Figure 20 Port Security Limited-Mode Menu
5. From the Port Security Limited-Mode menu, type M if you wish to
select a module other than the one currently displayed.
The prompt message is displayed:
Select Module ID: [1 to 8] ->
6. Enter the ID of the module you wish to select, and press the Enter key.
7. From the Port Security Limited-Mode menu, type 2 to select Set MAC
Threshold.
The following prompt is displayed:
Select Port Group ID [1 to 5] ->
8. Enter the port group number where you wish to specify a new MAC
address limit.
The following prompt is displayed:
Enter the MAC threshold value -> [1 to 1024] ->
9. Enter the maximum number of dynamic MAC addresses you wish the
port to be able to learn and press the Enter key. The range is 1 to 1024
addresses. The default is 100.
10. Repeat this procedure starting with Step 4 to specify MAC address
limits on other port groups.
11. Type 1 to select Display MAC Threshold.
The current MAC address limits for all ports are displayed.