AT&T Door Phone Controller User Manual
At&t, At&t door phone controller
Advertising
Table of contents
Document Outline
- Table of Contents
- 1. Introduction
- 2. Installation Procedures
- Important Safety Instructions
- General Information
- Introduction
- Door Phone Controller Back Panel Connections
- Prior To Installation
- AT&T Door Phone Controller Location
- Installation
- Connecting Door Speaker, Door Button, and Door Ajar Switch to the AT&T Door Phone Controller
- Connecting Power
- Operation and Controls Information
- Connecting the AT&T Door Phone Controller to Your Telephone Equipment
- 3. Installation for Home/Residential (Trunk Saver Mode - Loop Start)
- 4. Installation for Telephone System With Available Dedicated Trunk Port
- 5. Installation for PBX Equipment With Available Station Port
- 6. Installation for Telephone System Without Available Dedicated Trunk or Station Port
- 7. Troubleshooting and Maintenance
- A. DIP Switch Settings
- B. Option Selection Mode Definitions
- C. Specifications
- D. Using the Door Phone Controller With An Answering Machine
- E. Auxiliary Alert Option
- F. FCC Regulations and Warranty